Drum transfer pumps by DEBEM

Ideally suited for pumping corrosive fluids.

he drum transfer pumps consist of a dip tube, at the end of which the open impeller is fitted. It is secured to the drive shaft, connected to the pump with a ring nut.

The operation consists of an impeller integrated with the shaft, connected to the electric or pneumatic motor with a coupling joint. The transfer pumps must be used exclusively vertically and with the pump immersed in the fluid. Dry-running or the presence of air bubbles could damage the shaft guide internal bushing.

Advantages of these transfer pumps:

  • Portable
  • Suitable for corrosive fluids
  • Possibility of adjusting the flow rate (in the version with pneumatic motor)
  • No mechanical seals
  • Easy to disassemble
  • Viscosity up to 900 cps
  • Max flow rate 90 l/minute

For more details

Call us, the Tuma team will be happy to advise you and make you an offer, phone: +43 (0)1 914 93 40

Magnetic coupling vacuum pumps RVM by PEDRO GIL

An innovation with maximum efficiency in vacuum technology.

Better productivity, lower production costs, minimum maintenance.
Three concepts which all industry wants to hear, and which become a reality in all vacuum processes thanks to the new magnetic Roots RVM vacuum pump developed by Pedro Gil.

Indeed, this turbo booster was designed to reduce or eliminate the most common difficulties in using standard vacuum pumps. And that means working on the seals. Eliminating dynamic seals and substituting them for magnetic coupling, Pedro Gil has been able to reduce leakages to the lowest level in the current market. And this has rocketed the potential of this pump, converting it into a booster turbo. In fact, the rate of leakage is reduced extraordinarily with this type of magnetic closure, and this allows reaching a range of pressure from 10-2 mbar up to 10-5 mbar. This range means a much improved performance in the high vacuum zone.

Advantages:

  • Magnetic coupling on the shaft
  • Better efficiency in high vacuum
  • Better sealing with a life increase
  • Low leakage coefficient
  • Up to 10-5 mbar
  • Long seal life

With this Magnetic coupling vacuum pumps RVM, Pedro Gil provides an innovation which takes the vacuum process to a different level of efficiency, capability and cost-effectiveness.

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone +43 (0)1 914 93 40

Hygienic Centrifugal Pumps from INOXPA – Product of the month OCTOBER

Hygienic Centrifugal Pumps from INOXPA for highest hygienic demands in the food, cosmetic and pharmaceutical industry

  • Stainless steel centrifugal pumps meet the highest sterile requirements | good price-performance ratio | Certification according to 3A hygiene standards
  • Areas of application: Dairy industrie, food and beverage industry applications, brewery industry, cosmetics, chemical and pharmaceutical industries and many more..

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

 

Self-priming waste water pumps – Product of the month SEPTEMBER

Self-priming waste water pumps from VARISCO

Ideal for pumping liquids with suspended matter

  • Construction pumps and sewage pumps | built for heavy solid pollution | fast self-priming without bottom valve | easy maintenance
  • Areas of application: Municipal wastewater, construction pumps for pumping groundwater, industrial wastewater, irrigation, groundwater lowering, biotope pumps, industrial applications for self-priming centrifugal pumps, gravel and gravel works and much more.

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

 

Small centrifugal pumps – Product of the month AUGUST

Small centrifugal pumps with mechanical seal or magnetic coupling from SPECK

Universally applicable peripheral impeller pumps suitable for many industrial applications

  • Conveying gas, pulsation-free and particularly suitable for high pressures or delivery heights with relatively low delivery rates
  • Areas of application: Medical technology, inert gas welding equipment, spray systems for agriculture, reverse osmosis, cooling in machine tools, soft drink machines, drinking water treatment and much more.

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

 

Centrifugal pumps EN733 / DIN 24255 – Product of the month JULY

 Centrifugal pumps EN733 / DIN 24255

Series CM – powerful and universally applicable water pumps for clean or slightly dirty liquids with low viscosity

  • Large selection of materials | various mechanical seal variants | Equipped with counter flange as standard
  • Areas of application: water supply, pressure control and fire protection systems, cooling, heating and irrigation in industrial and agricultural applications

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

 

LIQUID RING VACUUM PUMPS – Product of the Month JUNE

LIQUID RING VACUUM PUMPS – Product of the Month JUNE
Liquid ring vacuum pumps from SPECK as base plate pumps or in block design

Vacuum pumps for conveying and compressing gases

These reliable vacuum pumps are of very high quality and suitable for many industrial applications. A wide range of graduated sizes for a large delivery volume range guarantee a wide range of uses. The different types of construction range from robust standard designs, pumps with no dead space, pumps that convey water, pumps that save process water up to low-noise two-stage pumps.

The liquid ring vacuum pumps are used in many industries in discontinuous and continuous operation in the three basic processes of suction, leakage venting and degassing, e.g. suction of dry gases, saturated gases and vapors and suction of polluted gases.

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

 

EBARA Normpumpen EN733 – Product of the month -10%

EBARA stainless steel standard pumps EN733 – Series 3

Single-stage electric centrifugal pump – high quality and reliable

Receive a 10% DISCOUNT * on the TUMA Product of the month – EBARA stainless steel standard pumps Series 3.

These centrifugal electric pumps built according to the EN733 standard, with axial suction and radial discharge, are the flagship of the EBARA products. They stand out for the quality and reliability of the individual components, for the vastness of the range and for the variety of solutions offered.

The efficiency and reliability of the pumps is improved by the possibility of using the inverter technology systems present in the EBARA range in different types, for an energy and economic saving of the entire system and an improvement of environmental sustainability.

The range consists of the 3 SERIES, available in AISI 304 or AISI 316 stainless steel in a monobloc version, with a plug in shaft, also a baseplate version with a flexible coupling.

Then there is the 3D SERIES standardised cast iron electric pump with AISI 304 impeller, also available with monobloc motor, rigid coupling, flexible coupling. Completing the 3D SERIES are the pumps of the MD series, monobloc electric pumps with elongated shaft and impeller in AISI 304 steel for the MD.

Areas of application for these reliable centrifugal electric pumps: water treatment, water supply, air conditioner, firefighting, washes, swimming pools, cooling towers, emptying tanks, heating systems, watering, irrigation

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

*valid until Mai 31st, 2021

AxFlow Service – Offer of the month

AXFLOW SERVICE PAIRED WITH TUMA KNOW-HOW

Receive a 10% DISCOUNT* on the comprehensive TUMA service

Our services guarantee you an optimal process flow and offer a wide range of services:

  • Consultancy | damage analysis I commissioning I maintenance I in-house workshop | logistics with a large spare parts warehouse
  • Offer of the month: -10% discount* on all pump maintenance and repairs

 

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

*valid until April 30rd, 2021

TUMA Pumps – Product of the month March 2021

ROTARY VANE VACUUM PUMPS – oil lubricated / oil-free

Receive a 10% DISCOUNT * on the TUMA Product of the month March 2021

Oil-lubricated or oil-free rotary vane vacuum pumps are always used when there are no condensable components in the conveyed volume flow or a better ultimate vacuum is required. They are particularly robust, have a functional construction and are suitable both for maintaining a certain pressure level and for evacuation processes. These vacuum pumps are versatile and do not require any operating fluid.
However, continuous operation at atmospheric pressure is not recommended.

Areas of application for the versatile pumps include: Vacuum packaging, Thermoformer, Injection molding technology, glass and marble industry, Foundries, Printers, Boat building, Vacuum handling systems etc.

For more details

Call us, the Tuma team will be happy to advise you and make you an offer: phone 0043 / 1 / 914 93 40

*valid until March 31st, 2021