Eitnergasse 12
1230 Wien
Austria
Tel.: 0043 / 1 / 914 93 40
Fax: 0043 / 1 / 914 14 46
E-Mail: office@tumapumpen.at
Gebrauchtpumpen kaufen
Eitnergasse 12
1230 Wien
Austria
Tel.: 0043 / 1 / 914 93 40
Fax: 0043 / 1 / 914 14 46
E-Mail: office@tumapumpen.at
Vacuum systems CPA-Triplex by DVP – Product of the month September
High efficiency triple industrial vacuum pump systems Advantages of these vacuum systems: With IE3 engine | vertical tank made of vacuum-tight, painted & welded steel | Pumping speed: 75 – 915 m³/h | automated switching on and off according to the vacuum requirement has a beneficial effect on energy savings | developed according to EN […]
Dry high vacuum pump RVS by PEDRO GIL – Product of month August
Increased compression efficiency for significantly faster and smoother pumping! Advantages of these vacuum screw pumps: Reduced heat generation for safe pumping | unique hydrodynamic spiral jacket cooling enables ATEX | no cooling necessary up to 800 m3/h | low outlet temperature | low power consumption | low vibration | low noise level | easy maintenance […]
Magnetically coupled plastic pumps by TUMA – Product of the month July
Plastic pumps for leak-free pumping of aggressive media! Advantages of these magnetically coupled plastic pumps: Pumping of corresive, toxic, dangerous, valuable media or media that crystallize in contact with the atmosphere | eddy current-free drive energy | achieves high efficiency | dry-running | easy dismantling | Pump components made of corrosion-resistant plastics: polypropylene (PP), polyvinylidene […]
Volumetric rotary vane pumps MAG-PR/PRG and PR/PRG
Rotary vane pumps offer consistently high performance and are extremely reliable. They generate the pressure with the help of an eccentrically mounted, rotating shaft, in which four movable slide plates are fitted. The eccentric bearing results in forced delivery and an even pressure build-up. The result is a pressurized liquid that meets all your needs. […]
EBARA CD & CDX (L) – electric centrifugal pumps with hydraulics made of AISI 304 and AISI 316
These non-self-priming, single-stage centrifugal pumps with hydraulics made of AISI 304 and AISI 316 are manufactured using a hydroforming process. This guarantees high corrosion resistance and achieves up to 80% hydraulic efficiency. Due to its small size, the CDX(L) series can also be used in narrow or difficult-to-access applications. This pump is suitable for pumping […]
Liquid ring vacuum pumps – close coupled – Product of the month June
Block pumps with mechanical seal developed for continuous use! Liquid ring vacuum pumps in block design are used in many industries in discontinuous and continuous operation in the three basic processes of suction, leakage extraction and degassification e.g. extracting of dry gases, saturated gases and vapors and extracting contaminated gases. The pumps have a constant […]
Submersible Sewage Pumps – Product of the month May
For reliable and effective waste water disposal. Using a submersible pump for wastewater offers several benefits that can help ensure effective and reliable wastewater disposal. For effective wastewater disposal, submersible pumps can effectively pump wastewater from deep pits and sumps that other pumps cannot reach. They are space-saving because the submersible pumps are submerged in […]
Rotary vane vacuum pumps by DVP – Product of the month April
New models for an improved ultimate pressure. The oil-lubricated vacuum pumps are used when the intake contains moisture or when a better final pressure is to be achieved. Within certain pressure ranges, these pumps run continuously or they are operated with tanks that have to be emptied. The pump performance should be dimensioned according to […]
Slurry pumps SH / SBH by TUMA – Product of the month March
Single-stage horizontal slurry centrifugal pumps. These high-performance pumps boast high efficiency and are equipped with a double casing. Due to the low wear and the strong bearing they are very durable. These centrifugal slurry pumps are extremely resistant to corrosion and erosion and their simple design allows for easy maintenance. These strong pumps are available […]
Heat transfer pumps by SPECK – product of the month February
High quality, reliable pumps for low and high temperature applications – reliable, service-friendly and robust. Thanks to a modular system, many components within the six series are completely identical and interchangeable. Further advantages are the wear-resistant SiC plain bearings, tapered bearings lubricated for life and impellers with back vanes, which reduce the axial load. The […]